Custom nameplate using ShapeOko2 and Easel from Inventables
So, my brother-in-law asked me to make nameplates to put on his sons’ bedroom doors. Since I hadn’t really used…
Category: Guides
Raspberry Pi Zero – USB Hub Mod
The Raspberry Pi Zero was launched last week and I managed to get one early! It’s really compact, but…
OpenHAB on Beaglebone Black (with SensorTag 2.0)
In some previous posts, I first set up Bluetooth on the Beaglebone Black and then set up Node-Red to convert…
Node-RED on Beaglebone Black (with SensorTag 2.0)
In my previous post, I was able to retrieve data from the SensorTag 2.0 on the Beaglebone Black using command…
BLE on Beaglebone Black (with SensorTag 2.0)
This post is part of my RoadTest review for the TI CC2650STK SimpleLink IoT SensorTag. As I plan to use…
Capacitive Touch with Atmel’s AT42QT1070 Touch Sensor IC
Rather than using an out-of-the-box capacitive touch solution for my projects, I thought I’d attempt making my own little breakout…
RIoTboard – Getting Started
I met Gregory from Freescale at Maker Faire Paris beginning of May after some emails going back and forth regarding…
Cypress CY8CKIT-059 PSoC 5LP Prototyping Kit – CapSense Linear Slider
I’ve been experimenting more in the scope of the Cypress CY8CKIT-058 PSoC 5LP Prototyping Kit RoadTest. This time, I experimented…
Controlling NeoPixels with the Raspberry Pi A+/B+
Addressable LEDs or NeoPixels are typically used in combination with an Arduino or similar microcontroller, due to the timing critical…
Cypress CY8CKIT-059 PSoC 5LP Prototyping Kit – Getting Started & Breathing LED
This is the first in a series of posts I plan to create as part of the Cypress CY8CKIT-058 PSoC…
End of content
No more pages to load